Bioprocess System Accessories
Bellco Glass, Inc. Media Addition Bottle,1L
The Media Addition Bottle is designed for holding media and comes with Stainless Steel 2-port assembly for attachment of tubing for connection to a pump to add media to a bioreactor vessel or spinner flask. MADE IN THE USA. Specifications:Size: 1L316L Stainless Steel Port AssemblyRa 32 or Better FinishType 1A Borosilicate Glass BottleCase Quantity: 1
Bellco Glass, Inc. Bellco Heating Blanket,115V-36L-MW 600 Watts
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. MADE IN THE USA. Male IEC connector for use with temperature controllersHeating at 5 watts/sq.in.Flask size: 36lWatts: 600 - for celltroll - medium wattageDimension (in.): 5 x 483 latches6ft cord (18-3) with c14 plugCaution: vessel must be stirred when heating blanket is in operation
Bellco Glass, Inc. Bioreactor Vessel, 7L
Round bottom bioreactor vessel is manufactured of type 1 class a Borosilicate glass. Graduations are 500ml to 2500ml every 500ml. Vessel dimensions are 180mm od x 355mm oah. A full range of accessories are available for this vessel. 7L.. MADE IN THE USA
Chemglass Life Sciences Reaction Vessel, 250mL, 67mm OD, 127mm OAH, Dish Bottom, Equivalent to Mettler OptiMax Part # 51162635
Reaction Vessel, 250mL, 67mm OD, 127mm OAH, Dish Bottom, Equivalent to Mettler OptiMax Part # 51162635. Mettler Optimax 1001 is a registered trademark of Mettler Toledo.
Chemglass Life Sciences Chemglass Air Aeration Tube (M10) - 226 mm, for 1 L-2 L Bioreactors
Chemglass air aeration tube with M10 thread and 226 mm tube length, designed for 1 L and 2 L bioreactors. The drilled-hole sparger extends to the bottom of the vessel and terminates below the impellers to produce bubbles that are broken up by the impellers for improved oxygen transfer.
- Designed for high gas flow rates in small bioreactors.
- Drilled-hole sparger extends to vessel bottom for efficient gas delivery.
- Terminates below impellers to improve bubble breakup and oxygen transfer.
- 316L stainless steel with electropolished finish for corrosion resistance.
- M10 threaded connection for secure mounting to headplates.
- Compatible with 1 L and 2 L bioreactor vessels.
Ace Glass, Inc. Tube, pressure, 27mL, 150psi, 19mm OD, 30.5cm long, complete with#7 front-seal plug
27mL pressure tube with #7 Ace-Thred, rated for 150psig at as much as 120C. Includes #7 front-seal plug. Dimensions: 19mm O.D. x 30.5cm long.
Ace Glass, Inc. Tube, pressure, 15mL, 150psi, 13mm OD, 30.5cm long, complete with#7 front-seal plug
15mL pressure tube with #7 Ace-Thred, rated for 150psig at as much as 120C. Includes #7 front-seal plug. Dimensions: 13mm O.D. x 30.5cm long.
Ace Glass, Inc. 3000mL, one-piece pressure reactor with #25 center, (4)#15, (1)#7 side necks, complete with addition funnel, condenser, pressure manifold, stirring and temperature control assemblies
3000mL one-piece pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Flask features #25 Ace-Thred center neck, 4 #15 Ace-Thred side necks, and 1 #7 Ace-Thred side neck. System is complete with addition funnel, condenser, pressure manifold, stirring and temperature control assemblies. Rated 45 PSI at 100C.
Chemglass Life Sciences Replacement Caster for Reactor Frames, For use on CG-1965-X 10L thru CG-1968-X 100L Frames
Replacement castor for reactor ..
Chemglass Life Sciences Chemglass 15 L Bio Reactor Baffle Assembly, M10 mount
Chemglass 15L Bio Reactor Baffle Assembly (CLS-1385-17) is a stainless-steel baffle designed to improve mixing efficiency and reduce vortex formation in 15 L glass bioreactors. It mounts near the reactor wall using an M10 thread and is suitable for fermentation and cell culture applications.
- Improves mixing efficiency and reduces vortexing.
- 316L stainless steel construction.
- Electropolished surface finish for corrosion resistance and cleanability.
- M10 mounting for secure installation near the reactor wall.
- Compatible with 15 L glass bioreactors.
- Replacement O-ring available for routine maintenance.